null

Clear-Com HXII-BP-X4

Clear-Com

BSW PART:
HXII-BP-X4

Helixnet 2 CH belt pack

$1,195.00

$1,195.00

Free Shipping

In Stock

Add to quote
Qualifies for free shipping

  • Main Features:
  • Easy to use front panel with OLED display & backlit keys
  • 2 Keysets assignable to channels
  • Stacked keys allow unique combination of channels
  • Independent Program Audio control
  • USB call signal flasher
  • Binaural controls on HXII-BP-X5
  • Ethernet Network port with PoE(1)
  • Powerline via XLR cable to HMS-4X(2/3)
  • Multiple mounting options
  • Rugged, lightweight polycarbonate enclosure
  • IP53 environmental rating
  • Wired Partyline - Networked
  • Hosted by Arcadia or HMS-4X(3)
  • Up to 24 Channels – Licensed
  • Up to 64 HelixNet Endpoints
  • Program Audio user level control
  • Easy to use CCM browser configuration
  • Fast front panel control & configuration
  • Central discovery & pairing on Arcadia
  • Plug-and-go powerline to HMS-4X(2/3)
  • Central firmware upgrades from host
  • Specifications:
  • HelixNet System Hosts:
    -Arcadia: Supports up to 64 HelixNet endpoints (HRM-4X, HKB-2X & HXII-BP) over Ethernet. Up to 24 Channels can be HelixNet Enabled using a Licensed Port for assignment to any HelixNet endpoints keyset.
    -HMS-4X: Supports up to 64 endpoints (HRM-4X, HKB-2X, HBP-2X, HXII-BP, HLI-2W2, HLI-4W2, LQ port). User stations can connect via the 2 Powerlines (note power and data limits) or over Ethernet via optional HLI-ET2 module. HMS allows use of 12 channels which can be expanded to 24 using optional license.
  • Connectors:
    -XLR Powerline**: 3-pin XLR-F
    -LAN/PoE: RJ45 etherCON
    -Headset: 4-pin XLR-M (-X4) or 5-pin XLR-F (-X5)
    -USB: Micro AB
  • Microphone Pre-Amplifier:
    -Headset Mic Impedance: 200Ω (Dynamic)
    -Headset Mic Voltage: 1.7V (Electret selectable)
    -Limiter: +23dB
    -Route to 4-wire output at 0dBu out: Mic Gain: 60dB (Dynamic), 45dB (Electret)
    -Frequency Response: 300Hz – 10 kHz ± 3dB, contoured for intelligibility
    -Distortion: <0.2% THD @ 1kHz
    -Noise: <-55dBu (Dynamic), <-65dBu (Electret)
  • Headphone Amplifier:
    -Load Impedance: >32Ω
    -Output Level: +12dBu before clipping
    -Sidetone: -12dB (selectable)
    -Route from a 4-wire input at 0dBu in: Max Gain: 0dB
    -Frequency Response: 40Hz - 10kHz ±3dB
    -Distortion: <0.2% THD @ 1kHz
    -Noise: -65dBu
    -Headphone Limiter: 0dB (selectable)
  • Device Power:
    -Voltage: 48V DC
    -Current (Max): 0.09A
    -Power (Max): 4W
    -BTU (Max): 13BTU/hr
    -This unit can be powered via: PoE - Power over Ethernet*: IEEE 802.3af-2003 - Class 1
    -PSE: 4.0W DC max @ Power Source Req.
    -PD: 3.84W DC max @ Powered Device Draw
    -Powerline**: Input Voltage: ±29.5V DC
    -Input Current (Max): 0.13A
    -Powerline Utilization: HXII-BP = 1 beltpack Note the maximum Powerline capacity of the HMS-4X Use HelixNet Cable Calculator to validate load and cable distance.
  • Environmental: 32° to +104°F (0° to +40°C) 0 - 90% relative humidity IP53 rated
  • Dimensions:
    -3.9 x 5.3 x 1.7in (WxHxD)
    -99 x 135 x 43mm (WxHxD)
  • Weight: 12.2oz (0.35kg)
  • Network Protocols:
    -Ethernet IPv4–Unicast Audio and Control
    -mDNS–Multicast Device Discovery Layer 3 routable with mDNS function limitations
    -HTTP–Management RTP–Audio Transport WavPack–Audio Codec
  • Network Ports:
    -Unicast:
     Port 80 TCP–System Management
     Port 6001 TCP–System Management
     Port 6001 UDP–Audio Streams
    -Multicast: Port 5353 UDP–mDNS, Names, Discovery, Linking Optional for device names and linking
  • Network Parameters:
    -Endpoint Resource Use: 1 (-X4 variant)
    -Endpoint Resource Use: 2 (-X5 for binaural)
    -Bandwidth: 300 (max) kbps from each HXII-BP to HMS 1200 (max) kbps from HMS to each endpoint
    -Network Jitter Tolerance: <= 128ms jitter buffer per audio stream receiver automatically adjusted to network performance
    -QoS Tags: DSCP=41, Assured Forwarding (AF)
    -Link-Local Default IP Address Range: 169.254.0.0/16
    -System Reserved IP Range: 10.0.0.0/8 for endpoints
  • Recommended Ethernet Switches:
    -Managed Ethernet Switch – Layer 3
    -100/1000 Base-T ports for endpoints
    -1000 Base IP Trunks between switches
    -QoS configuration
    -Energy Efficient Ethernet bypass option
    -IGMP Snooping bypass option
  • Please refer to the Clear-Com HelixNet Network Guide for additional switch settings and network characteristics.
  • *Ethernet to HMS-4X requires HLI-ET2
  • **Not available for Arcadia. Contact Clear-Com