null

FREE SHIPPING ON ORDERS $100 OR MORE *

* Restrictions apply, click here to view our shipping policy

Burk Technology TLM-LED

Burk Technology TLM-LED

BURK

BSW PART:
TLM-LED

Monitors 1-8 lamps, beacons or sidelights

More Site Control More Burk Technology
$565.25 $595.00
You save $29.75

The TLM-LED is a universal lamp alarm relay designed to sense the failure of flashing or steady LED beacon lamps or obstruction lamps. The TLM-LED monitors the operation of one to eight lamps and energizes when one or more lamps fail. All monitored lamps must be the same wattage and voltage. When properly integrated with ARC Plus or ARC Solo systems, it provides the remote lamp monitoring protection required by the FAA-AC No: 150/5345-43E.

When a lamp fails, the TLM-LED senses a decrease in current flow. After a 10s trip delay, the onboard LED glows and the two alarm outputs energize. The outputs and the LED are reset when the failed lamps are replaced and the unit is recalibrated. Removing the input voltage de-energizes the output and the LED.

$565.25 $595.00
You save $29.75

Out of stock

Add to quote

  • Main Features:
  • Monitors LED lamps for failure
  • Designed for use with all types of LED beacon and obstruction lamps
  • Number of lamps monitored is switch selectable up to 8
  • 10A isolated SPDT alarm output contacts
  • Provides visual relay status of operation, alarm, trip delay, and calibration
  • Self-calibrating
  • Specifications:
  • Dimensions:
    3” (7.67 cm) H
    2” (51.3 cm) W
    1.64” (41.7 cm) D
  • Operating Temperature: -40° to 60° C
  • Input Voltage: 120 to 230VAC ±15%, 50/60Hz
  • Line Voltage Output:
    5A @ 240VAC or 30VDC resistive;
    1/4 hp @ 125VAC;
    1/2 hp @ 250VAC
    To operate a spare lamp or alarm
  • Isolated Alarm Output:
    10A @ 240VAC or 30VDC resistive;
    1/4hp at 125VAC;
    1/2hp at 250VAC
  • Mounting: One #10 (M5 x 0.8) screw
  • Termination: Screw terminals for up to 14 AWG (2.45 mm2) wire
  • Trip Delay: Factory fixed at ≈ 10s
  • Circuitry: Encapsulated