Rack mount kit for two Broadcast Tools 1/2-rack units, 8" deep. *Rackmount only. Product units not included.

The GPI-16 + G2 NET interfaces 16 general purpose logic/trigger inputs to a computer’s USB serial port or to an Ethernet Network via TCP or UDP socket connection. The user may select from two...

The GPI-16 + G2 interfaces 16 general purpose logic/trigger inputs to a USB serial port or to an RS-232 serial COM port. The user may select from two pre-programmed serial formats; the...

The AES DA 1×6, six XLR output, one-input AES/EBU distribution amplifier is ideal for distributing AES/EBU signals or wordclock. It features dual (2x) power input jacks to allow for redundant power...

The Broadcast Tools SS 4.1 MLR/RJ is a transparent four input, one output stereo RJ45 audio switcher/router with mechanical latching relays. The SS 4.1 MLR/RJ is perfect for all types of passive...

Need to convert the DB-9 connector to the euroblock removable screw terminals? The Connect O' Adapter 9 XDS/MAX will do the job. The COA-9 XDS/MAX is designed to plug into the male 9-pin D-Sub...

The SS 4.1 MLR is a transparent four input, one output switcher/router with mechanical latching relays. The SS 4.1 MLR is perfect for all types of passive signal switching via front panel switches,...

The WVRC-4 Plus provides a cost-effective, ½ rack-unit solution allowing dial-up recordable voice response and/or web-enabled control and monitoring via a web browser and/or smart phone. The...

The DTD-16 + G2 is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length which can be assigned to any one of eight SPST...

The Broadcast Tools Box O’ Relays 6 is a six channel optically isolated relay module, following in the footsteps of the original Box O’ Relays 4 from over twelve years ago. The Box O’ Relays 6’s new...

The Broadcast Tools COA-15/RJ is a DB-15M to RJ45 Breakout Adapter used to convert GPIO xNode General Purpose Outputs (GPOs) to an RJ45 connector. The COA-15/RJ also breaks out the GPIO ports 5 GPIs...

The DTD-16 + G2 NET is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length which can be assigned to any one of eight...