- Package Includes:
- 1 Angry Audio RAVE Console
- 2 Angry Audio HEADPHONE GIZMO's
- 1 Angry Audio AUDIO GIZMO ANALOG USB Soundcard
- 1 BSW AIRCANS 5 Pack Headphones
- 8 BSW DUAL Female XLR to RJ45 Female Adapter Cables
- 8 BSW DUAL Male XLR to Female RJ45 Adapter Cables
- 4 BSW DUAL Male RCA to Female RJ45 RCA Adapter Cables
- 4 10ft XLR Male to XLR Female Cables
- Angry Audio RAVE Main Features:
- On-Air indicator lights up when mics are open and monitors muted.
- Two stereo output mix buses, Program and Audition.
- Preview (cue) on every input.
- Channels 1-4 switchable between mics and lines.
- Dedicated meters for both output mix buses.
- Machined aluminum control surface with laser-etched markings.
- On/off buttons are slightly recessed to prevent accidental actuation.
- Channels 5-6 switchable between pro and IHF levels.
- Ergonomic wrist rest.
- Channels 7-8 are capable of mix-minus.
- Two mix-minus outputs with talkback.
- Monitor selector with talkback to guests.
- Built-in high-power headphone amplifier.
- Flexible monitoring section for board operator.
- Full-throw faders for monitor and headphone volume.
- Control room speaker output. Mutes when microphones are on.
- Redundant outputs (DA type) for both Program and Audition.
- Logic for mics and lines, user buttons and on-air tally.
- Premium long-life components throughout.
- StudioHub+ connectors for line inputs and outputs.
- Four studio-grade mic preamps.
- Both kinds of jacks for both kinds of headphone plugs.
- 48V phantom power.
- Ultra low noise and distortion specifications.
- Powder-coated steel chassis. RFI immune and built to last.
- External broadcast-grade power supply.
- Feed audio and power to a chain of guest headphone amps.
- Angry Audio AUDIO GIZMO ANALOG Main Features and Specifications:
- BOTH 1/4" AND 1/8" HEADPHONE JACKS MEAN YOU LL NEVER BE HUNTING FOR ONE OF THOSE ADAPTER THINGS.
- PREMUM COMPONENTS FOR PERFORMANCE AND LONG LIFE.
- CONTOURED CORNERS.
- PRISTINE ANALOG AUDIOPHLE CIRCUIT DESIGN COMBINED WITH BROADCAST-GRADE RELIABLITY.
- CAN BE ORDERED WITH OR WITHOUT VOLUME CONTROL.
- AUDIO OUTPUT CONNECTOR DAISY CHAINS THE INPUT AUDIO AND POWER TO SUBSEQUENT DEVICES. PERFECT FOR FEEDING MULTIPLE GUESTS.
- POWERED BY (INCLUDED) WALL ADAPTER OR FROM A STUDIOHUB+ POWER INSERTER.
- BALANCED STEREO ANALOG AUDIO INPUT ON R345 USING THE POPULAR STUDIOfUB+ PINOUT.
- POWDER-COATED STEEL ENCLOSURE FULLY SURROUNDS THE ELECTRONICS, I.E./ NO EXPOSED CIRCUIT BOARDS.
- Connections:
- Audio Input and Output: RJ45 jack, StudioHub+ format
- Headphone Outputs: 1/8” (3.5mm) and 1/4” (6.3mm) TRS
- Power: 16VAC (115V or 230V) via wall adapter or +/-15VDC via RJ45 audio input jack
- Headphone Amplifier:
- Nominal Input Level: +4dBu
- Maximum Input Level: +26dBu
- Input Impedance: 20kΩ Fully Balanced
- Headphone Impedance: ≥16Ω
- Output Voltage: +20dBu
- Output Power: 2.6W per channel at 16Ω
- Output Current: 400mA
- Frequency Response: 20Hz - 20kHz ±0.1dB
- THD+N: ≤0.003% (20Hz - 20kHz)
- Noise: ≤-96dBu (20Hz - 20kHz unweighted)
- Dynamic Range: ≥115dB
- CMRR: ≥80dB (1kHz)
- Power and Environmental:
- Power Input (120V Adapter): 120VAC 60Hz
- Power Input (230V Adapter): 230VAC 50Hz
- Power Output (Adapter): 16VAC, 500mA, 8.0W
- Operating Temperature: 0º to 40º C (32º to 104º F)
- Storage Temperature: -20º to 45º C (-4º to 113º F)
- Relative Humidity: 0% to 90% non-condensing
- BSW AIRCANS Main Features and Specifications:
- 5X - Aircan BSW Dynamic Broadcast Headphones
- Closed-Back Design To Eliminate Headphone Bleed
- Lightweight For Ultimate Comfort & Reduced Ear Fatigue (VERY comfy)
- 32 Ohm Impedance
- Detachable 10ft Straight Cable With sound reduction coil
- 1/8in / 3.5mm Connector, 1/4in / 6.35mm Adapter
- Closed-Back Design To Minimize Headphone Leakage
- Driver: 40mm Sensitivity: 98±3dB
- Impedance: 32Ω
- Frequency Response: 10HZ-24kHz
- Power Rating: 250mW, Max Power: 450mW
- Cable Connector: 3.5mm Fixed + 6.35mm Adapter
- Cable: 3-Meter Detachable Straight Cable
- Net Weight per headphone: .63lbs (including cable)