- Main Features:
- Up to 32 channels of Dante audio-over-IP with AES67 interoperability
- 48 or 96kHz sample rates
- Balanced microphone/line level inputs with level range of -60 to +24dBu
- Balanced line level outputs with level range of 0 to +24dBu
- Switchable +48V phantom power on each input
- RGB front panel LEDs provide per channel metering and stream status
- Built in web server provides audio level configuration and monitoring
- 1U rack-mount unit
- Dual RJ-45 network jacks can be operated in redundant or switched mode
- Built-in universal 90-260VAC power supply
- Auxiliary +12VDC input provides power supply redundancy
- Dante Domain Manager "DDM" ready
- Public control protocol
- Specifications:
- DANTE INPUT/OUTPUT:
- Type: 100/1000Mb Ethernet
- Connector: Dual RJ-45 operable as redundant Dante or as a network switch
- Channels: 8.8M – 8 input and 8 output channels
- Audio formats: 16, 24 and 32 bits per sample
- Sample Rate: 48kHz, 96kHz
- Latency: 0.15, 0.25, 0.5, 1.0 and 5.0ms
- ANALOG MIC/LINE INPUT
- Type: Balanced
- Input Level: -60 to +24dBu in 1dBu steps
- EIN: -126 dBu Equivalent Input Noise @ -26dBu level setting
- Phantom Power: +48V @ 10mA per channel max , software switchable
- A/D converter: 32 bit over sampling
- Input Impedance: 10K ohms
- Dynamic Range [1]: >114dB
- THD+N [2]: < -97dB
- Frequency Response:
- @ 48kHz Sample Rate: 20Hz to 20kHz +0.1/-0.5dB
- @ 96kHz Sample Rate: 20Hz to 40kHz +0.1/-2.0dB
- Connectors: 3.81mm Terminal Block, DB-25 or RJ-45/StudioHub+GPIO
- ANALOG LINE OUTPUT
- Type: Balanced
- Output Level: -10 to +24dBu in 1dBu steps
- D/A converter: 32 bit over sampling
- Load Impedance: 2K ohms or greater
- Dynamic Range [1]: >114dB
- THD+N [2]: < -100dB
- Frequency Response:
- @ 48kHz Sample Rate: 20Hz to 20kHz +0.1/-0.25dB
- @ 96kHz Sample Rate: 20Hz to 40kHz +0.1/-3.0dB
- Connectors: 3.81mm Terminal Block, DB-25 or RJ-45/StudioHub+GPIO
- GPIO:
- Opto-isolated Inputs:
- Isolation: 2,500 VACRMS
- Input Drive: 4mA typical with internal 5V supply and internal 1K current limiting resistor
- Input Voltage Range: Between 3V and 24V. Add external resistor above 24V to limit current.
- Relay-isolated Outputs:
- Isolation: 1,500 VAC
- Contact Rating: Up to 60 VDC/60VAC and 350mA, 600mW maximum
- LATENCY (48kHz, L24):
- Analog Input to Dante Transmit: 770.21 μs
- Dante Receive to Analog Output: 713.05 μs
- POWER:
- Built in Power supply: 90-260VAC, 47-63Hz with IEC C-14 AC inlet
- Redundant Power supply (Optional): Supplied using an external +12VDC, 60W power supply with 2.1mm locking plug
- REGULATORY:
- FCC Part 48 Class A (US)
- CE Mark (EN55022 Class A EN55024)
- RoHS Compliant
- GENERAL:
- Dimensions: 1 RU, 19”(482mm) W x 6”(152mm) L x 1.75”(44mm) H
- Weight: 5 lb (2.2kg) max (32.32M)
- Operating Temperature: 0C to 40C in free air
