- Main Features:
- Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
- Independent cardioid and figure-of-eight condenser elements
- Switch selection of Mid-Side mode and two internally matrixed stereo modes
- Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
- Integral 80 Hz high-pass filter switch and 10 dB pad switch
- State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Certified by the METAlliance (Music Engineering and Technology Alliance)
- Specifications:
- ELEMENT Externally-polarized (DC bias) condenser
- POLAR PATTERN Cardioid and Figure-of-eight
- FREQUENCY RESPONSE 20-18,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY Stereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa
- Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa
- Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa
- Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
- IMPEDANCE 50 ohms
- MAXIMUM INPUT SOUND LEVEL Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
- NOISE Stereo 90°: 25 dB SPL
- Stereo 127°: 16 dB SPL
- Mid: 15 dB SPL
- Side: 17 dB SPL
- DYNAMIC RANGE (typical) Mid: 134 dB, 1 kHz at Max SPL
- Side: 132 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO Stereo 90°: 69 dB, 1 kHz at 1 Pa
- Stereo 127°: 78 dB, 1 kHz at 1 Pa
- Mid: 79 dB, 1 kHz at 1 Pa
- Side: 77 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 48V DC, 6.4 mA typical (both channels total)
- SWITCHES 90°, 127°, M-S; Flat, roll-off; 10 dB pad (nominal)
- WEIGHT 517 g (18.2 oz)
- DIMENSIONS 193.0 mm (7.60") long, 53.4 mm (2.10") maximum body diameter
- OUTPUT CONNECTOR Integral 5-pin XLRM-type
- CABLE 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end ACCESSORIES FURNISHED AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case AUDIO-TECHNICA CASE STYLE R1
