ART PHANTOMIIPRO

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones while maximizing battery life.

The Phantom II Pro installs inline between your microphone and a balanced line input on your gear. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used.

• XLR connectors for balanced inputs and outputs

• Low power, high efficiency CMOS circuitry for Long battery life using a standard 9 Volt battery (Alkaline recommended)

• Can be powered with an external power supply from AC mains

• Rugged extruded aluminum case with accessible battery compartment

• LED On/Off switch

• Low noise, low distortion circuitry

• Input Connections: Female XLR (2)

• Output Connections: Male XLR (2)

• Phantom Power Voltage: 48 Volts DC typical

• Current Limiting Resistors: 6.98k Ohms (1%)

• Power Source: V battery (ANSI-1604A type Alkaline recommended) or external 7.5-12V AC/DC, < 150 mA supply

• Current Drain: 10 mA - no load / 45 mA - typical (full load - 2 microphones)

• Battery Life: > 10 hours with Alkaline battery - typical (full load)

• Dimensions (in): 1.85 H x 4.6 W x 3.9 D

• Dimensions (mm): 47 H x 117 W x 99 D

• Weight: 0.82 lbs / 0.37 kg