Wheatstone LX-S1

This Module is for Studio 1 control, MXM Talkback, and Event hot button select.

SEND 3

Level Control When an input channel is in SET mode, this knob controls the level of that channel into the SEND 3 mix. There is an associated LED indicator ring in the meterbridge to display this level. Pressing the knob turns the Send ON or OFF.

MXM Talkback Buttons

Pressing a button momentarily sends the Talkback interrupt signal to the selected Mix Minus bus. Releasing the button removes the Talkback interrupt signal from the mix.

Encoder to SELECT Event

Rotate the encoder to select the desired event. Once the encoder is turned, the TAKE button lights up until it is pressed to select one of the events.

TAKE Button for Event Selection

Events (up to 99) are created and named.

EVENT 8-Character Display

Shows the last event taken, or the available events as the selector is scrolled. If no event is taken, times out after 20 seconds and reverts to showing the last event taken.

PRESET Hot Buttons for Events 1, 2, 3, & 4

The first 4 saved events have a special status; they can be recalled by pressing one of these hot buttons. Press once and the button flashes, press a second time and the event is taken and the light goes out.

EXT Button for Studio 1 Monitor

A programmable “wild” source hot button for the Studio 1 monitor mix. Press the EXT button to choose this wild source; press and hold to program the button. The button remains lit while the wild source is feeding the mix.

SET Button for Studio 1 Source Selection

Press to enter SET mode for the Studio 1 mix and select the desired source. Studio 1 SOURCE Selection Buttons Pressing one of these selects a console output bus as the Studio 1 monitor source. The button stays lit to indicate the selection.

TALKBACK Button for Studio 1

Press to momentarily send the Talkback interrupt signal to the Studio 1 monitor mix. Releasing the button removes the Talkback interrupt signal from the mix.

STUDIO 1 Source 8-Character Display

Shows the active source for the Studio 1 monitor mix. STUDIO 1 Level Control Sets the level of the Studio 1 monitor mix.