null

Tascam SB-16D

Tascam

BSW PART:
SB-16D

16 MIC IN/16 LINE OUT ANALOG/DANTE CONVERTER

$2,499.00

Offering the same performance and hardware quality as TASCAM Sonicview recording and live mixers, TASCAM SB-16D Dante-networked 16-in/16-out stage boxes offer all the advantages of Dante networking, combined with seamless integration with TASCAM Sonicview recording mixers. The stage boxes can be used as a floor stage box or rack mounted, and multiple stage boxes can be used simultaneously in a Dante network.

When a SB-16D stage box is connected to a TASCAM Sonicview 16XP or 24XP recording mixer, microphone gain can be remotely controlled from the mixing console, and all SB-16D I/O comes up on the TASCAM Sonicview VIEW touch screens for hassle-free ease of use.

Easily accommodate large ensembles and extensive installed Dante systems using the SB-16D's 16 XLR mic/line inputs and 16 XLR line outputs. Need more I/O? Simply network multiple SB-16Ds. The mic/line inputs are extremely quiet, achieving a -128 dBu EIN with a +32 dBu maximum input level. Each input channel has +48V phantom power and an SIG OL LED for input-level monitoring. Each line output also is equipped with SIG OL LEDs.

As in TASCAM Sonicview recording mixers, each SB-16D microphone input feeds a TASCAM Class 1 HDIA (High Definition Instrumentation Architecture) preamp—the finest mic preamp TASCAM has ever made. Thanks to an instrumentation amplifier with extremely good noise characteristics in the first stage, Class 1 HDIA microphone preamps exhibit excellent EIN, signal-to-noise ratio, distortion ratio, and frequency response. The mic inputs can accept up to +32 dBu signals, providing plenty of headroom for sudden level increases. As with TASCAM Sonicview recording mixers, the SB-16D uses 32-bit analog-to-digital converters and a 96 kHz sampling frequency. Repeated internal and external evaluations were conducted to fine-tune the SB-16D, ensuring best-in-class sound that will never disappoint.

$2,499.00

Out of stock

Add to quote

  • Main Features:
  • 16 in/16 out Dante enabled stage box with redundancy
  • 16 XLR mic/line inputs with +48 phantom power and SIG OL LED input signal/overload indicators
  • 16 XLR line outputs with SIG OL LED output signal indicators
  • Up to 96 kHz sampling and 32-bit precision
  • Supports both floor installation and 3U rack mounting
  • Fully controllable from connected TASCAM Sonicview mixers
  • Remote control and offline editing using TASCAM IO Control app for macOS, Windows, and iPadOS
  • Equipped with DC input and supports redundant power supply (DC power supply not included)
  • Equipped with 8 in/8 out expansion GPIO terminals, expandable to 16 in/16 out when connected to a TASCAM Sonicview mixer
  • Switchable reference level
  • Equipped with etherCON compatible connectors as Dante connection
  • Dante Domain Manager support
  • AES67 interoperability
  • SMPTE ST 2110 interoperability
  • Specifications:
  • MIC/LINE INPUTS (1-16):
    -CONNECTOR XLR-3-31 type (1: GND, 2: HOT, 3: COLD)
    -Input Impedance: 5.0kΩ and more
    -Max Input Level: +32dBu (TRIM Min, PAD: ON), +12dBu (TRIM Min, PAD: OFF)
    -Min Input Level: -42dBu (TRIM Max, PAD: ON), -62dBu (TRIM Max, PAD: OFF)
    -Phantom Power: +48V available
  • LINE OUTPUTS (1-16):
    -CONNECTOR: XLR-3-32 type (1: GND, 2: HOT, 3: COLD)
    -Nominal Output Level:
     +6dBu (D.ref: -9dB)
     +4dBu (D.ref: -14dB, -16dB)
     +4dBu or 0dBu (D.ref: -18dB, -20dB)
    -Max Output Level:
     +15dBu(D.ref.: -9dBFS, A.ref: +6dBu)
     +18dBu(D.ref.: -14dBFS, A.ref: +4dBu)
     +20dBu(D.ref.: -16dBFS, A.ref: +4dBu)
     +18dBu(D.ref.: -18dBFS, A.ref: 0dBu)
     +20dBu(D.ref.: -20dBFS, A.ref: 0dBu)
     +22dBu(D.ref.: -18dBFS, A.ref: +4dBu)
     +24dBu(D.ref.: -20dBFS, A.ref: +4dBu)
     *D.ref.: Digital Reference Level, A.ref.: Analog Reference Level
     *0dBu=0.775Vrms
    -Output Impedance: 100Ω or less
  • Dante(PRIMARY/SECONDARY):
    -CONNECTOR: etherCON Cat5e compatible
    -Number of channels: 64 channels (48 kHz), 32 channels (96 kHz)
    -Ethernet: 1000BASE T(IEEE802.3ab)
    -Cable: CAT5e STP
    -Supports redundant mode and Switched mode
  • GPIO:
    -CONNECTOR: D-sub 25pin (8in/8out, female, inch)
    -Input circuit: pull up (5V)
    -Output circuit: Open corrector
    -Output impedance: 10Ω
    -Withstand Voltage: 20V
    -Maximum current: 35mA
    +5V Maximum supply current: 50mA
  • Dimensions:
    -454(W) x 140 (H) x 179.6 (D) mm (The original foot is attached)
    -482.8(W) x 132(H) x 120(D) mm (Rackmount angle is attached)
    -17.88(W) x 5.52(H) x 7.08(D) inch (The original foot is attached)
    -19.01(W) x 5.20(H) x 4.72(D) inch (Rackmount angle is attached)
  • Weight: 4.5kg / 9.93 lb
  • AC Power Supply: AC100V 240V 50/60 Hz
  • DC Power Supply: DC11V/4A - 27V/2A
  • Power Consumption: 44W
  • Operating Temperatures: 0 - 40 ℃
  • Supported Operating System:
    -Windows: Windows 11 64 bit, Windows 10 64 bit
    -Mac: macOS Monterey(12), macOS Big Sur(11), macOS Catalina(10.15)
    -iOS: iPadOS 15, iPadOS 14
  • Included Items:
    -SB 16D x1
    -Power Code (JAPAN USA/EUROPE/OCEANIA) x1
    -Rackmount angle screw kit x1
    -TASCAM ID registration guide x1
    -Owner's manual with warranty x1
  • MIC PRE AMP EIN (Equivalent Input Noise): -128dBu or less
  • Distortion:
    -0.002% and less (MIC/LINE > Dante, +4dBu Inputs, PAD=OFF, TRIM MIN, JEITA)
    -0.002% and less (DANTE > LINE OUTPUT, 0dBFS Outputs, JEITA)
  • Frequency characteristic:
    -20Hz - 20kHz +0dB、-0.5dB(48kHz) (MIC/LINE > LINE OUTPUT, JEITA)
    -20Hz - 40kHz +0dB、-1.0dB(96kHz) (MIC/LINE > LINE OUTPUT, JEITA)
    -20Hz - 20kHz +0dB、-0.5dB(48kHz) (DANTE IN > LINE OUTPUT, JEITA)
    -20Hz - 40kHz +0dB、-1.0dB(96kHz) (DANTE IN > LINE OUTPUT, JEITA)
  • Crosstalk: 100dB or more (MIC/LINE > OUTPUT, 1kHz Sine wave, JEITA)
  • Dynamic range:
    -110dB or more (MIC/LINE > DANTE, PAD=OFF, TRIM MIN, D. 20dBFS, JEITA)
    -111dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 48kHz)
    -112dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 96kHz)