­
RDL SF-BNC2 - Interfaces and Routers

Radio Design Labs SF-BNC2

RDL

BSW PART:
SF-BNC2

Bidirectional Unbalanced Stereo Audio Network Interface - Dante

$669.73 $892.97
You save $223.24
$669.73 $892.97
You save $223.24

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • Dante Network Interface for Two Audio Inputs and Two Audio Outputs
  • Inputs and Outputs on Front-Panel RCA Jacks and Stereo 3.5 mm Mini-Jacks
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Converts Two Unbalanced Line-Level Audio Sources to Dante Network Channels
  • Converts Two Dante Network Audio Signals to Unbalanced Line Level
  • Special Software Not Required for Module Setup
  • Exceptional Low-Noise and Low-Distortion Performance
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af)
  • Equipped for SysFlex™ Rack Mounting or Surface Mounting
  • Specifications:
  • Network Connector: RJ45 with Link and Speed indicators
  • Digital Audio Ethernet Protocol: Dante
  • Transmission Rate: 100 Mbps
  • Sample Rates Supported: 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
  • Bit Depth Supported: 24 bits
  • Audio Operating Level: -20 dBFS = -10 dBV
  • Reference Level: 0 dBFS = +10 dBV
  • Line Inputs to Network Interface:
  • Inputs (4): Mini-jack Stereo or RCA jacks (2, L and R)
  • Input Level (for +4 dBu/-20 dBFS): -10 dBV nominal
  • Input Level (maximum): +10 dBV
  • Input Impedance: > 15 kΩ
  • Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
  • Noise below -20 dBFS (20 to 20 kHz): < -80 dB
  • Crosstalk: < -85 dB (L into R, R into L, 20 Hz to 20 kHz)
  • THD+N: < 0.05% (20 Hz to 20 kHz, -20 dBFS); 0.02% at 1 kHz (typ)
  • Headroom: 20 dB
  • Network to Line Outputs:
  • Outputs (4): Mini-jack Stereo or RCA jacks (2, L and R)
  • Output Level (operating): -10 dBV nominal
  • Output Level (maximum): +10 dBV
  • Output Impedance: 40 Ω
  • Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
  • THD+N: < 0.1%
  • Noise: < -75 dB (below -10 dBV)
  • Crosstalk: < -70 dB (20 Hz to 20 kHz)
  • Headroom above -10 dBV: 20 dB
  • Indicators (3): Ethernet Link and Speed (2, rear panel); Sync (front panel)
  • Ambient Operating Environment: 0° C to 50° C
  • Power Requirement: PoE Class 0, IEEE 802.3af
  • Specification Conditions: Gain/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain
  • Dimensions: 2.79" (7.09 cm) W; 1.68" (4.27 cm) H; 5.77" (14.66 cm) D
  • Package Type: Cardboard Box
  • Package Dimensions: 7 x 4.375 x 2.25 in.
  • Shipping Weight: 1.115 lbs.
  • WEEE weight: 0.905 lbs.
  • Tariff code: 8517.18.0050