­
Lectrosonics IFBlue Freq A1 - IFB

Lectrosonics IFBlue Freq A1

LECTROSON

BSW PART:
IFBR1C-A1

IFBlue Wideband IFB Beltpack Receiver, Freq A1

$499.00 $649.00
You save $150.00
$499.00 $649.00
You save $150.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • Compatible with Lectrosonics IFB transmitters including Hybrid transmitters in IFB mode
  • Stores up to 10 frequency presets in memory
  • LCD interface for programming and operation
  • High sensitivity for extended operating range indoors or outdoors
  • USB port for firmware updates
  • Compact, rugged injection molded ABS housing
  • Attached battery door
  • 2 AA batteries; alkaline, lithium, or NiMH rechargeables (supplied)
  • Specifications:
  • Frequency Selection Steps: 25 kHz; VHF: 125 kHz
  • Sensitivity: 1 uv (20 dB SINAD)
  • Signal/Noise ratio: 95 dB A-weighted
  • Squelch quieting: 90 dB
  • AM rejection: 50 dB, 10 uV to 100 mV
  • Modulation acceptance: ±20 kHz
  • Spurious rejection: Greater than 70 dB
  • Operating temperature range: -20 to 50 degrees C.
  • Third order intercept: 0 dBm
  • Frequency response: 100 Hz to 10 kHz, (+/-1 dB)
  • Audio output: 1V RMS into 50 ohms minimum
  • Antenna: Headphone cable
  • Min. headphone impedance: 16.0 Ohms
  • Programmable memory: 10 frequencies can be stored as presets
  • Controls:
  • Top Panel: Single knob controls Audio Output Level and Power On
  • Side Panel: Membrane switches with LCD interface for Frequency Selection and Preset function
  • Indicators: Multi-color LED indicator for power on and battery status
  • Battery: Two AA batteries (+1.5 VDC each)
  • Battery Life: 10 hours (Alkaline) 12 hours (NiMh), 20 hours, 40 minutes (Lithium)
  • Current consumption: 120 mA
  • Weight: 4.6 oz (130 g) with batteries
  • Size: 4.25 x 2.75 x 1.125 in. 108 x 70.0 x 28.5 mm