- Main Features:
- Highly efficient, high quality OPUS compression or AACplus, MP3 also supported for legacy sources
- Uncompressed PCM streaming
- Guaranteed end-to-end audio delay (RTP)
- RTP transmission redundancy
- Studiohub in/out and AES3 output
- 8x closure output, send in sync with audio stream or status function
- No need for fixed IP addresses with Reflector EVO
- Easy to configure
- 8x Contact input (for in-sync delivery or streaming control)
- 8x Relay output
- RS-232 for Metadata output (v2)
- Power over Ethernet (PoE) and 24VDC power
- SNMP support (v2)
- Specifications:
- ELECTRICAL:
-3af PoE on RJ-45 connector
-24 VDC nominal, 12 Watt max.on terminal block - ETHERNET
-10/100Mbps auto rate, full/half duplex
-RJ-45 connector with integrated Link/Activity
-3af PoE support
-Second 10/100 Ethernet port for future software support - DIGITAL AUDIO INTERFACE: AES3 on Studiohub (output only)
- EXTERNAL: USB connector type A female.
- RS-232: For serial metadata gateway or custom functions
- ANALOG AUDIO INTERFACES:
-Balanced Audio input and output, Stereo, on separate Studiohub (RJ45) connectors
-Differential input, 18kOhm input impedance
-Software Switchable level/sensivity (+6dbu/+24dbu)
-Frequency response (-1dB) 20..20‘000 Hz (depends on used codec, best results @48kHz PCM)
-Signal to Noise Ratio 87dB,THD 0.01%
-Stereo crosstalk -88 dB
-Input and output level software controllable - DIGITAL AUDIO INTERFACE: AES3 on Studiohub (output only)
- EXTERNAL: USB connector type A female.
- CONTACT INPUT: 8 discrete / dry contact inputs
- RELAY: 8 relay contacts, 24V 0.5A, normally open
- MECHANICAL:
-Aluminum case, 620g
-Dimensions 216 x 38 x 125 mm
-(8.5 x 1.5 x 4.92” inch)
-Rack and wall mountable using optional accessories - SUPPORTED AUDIO FORMATS:
-OPUS
-PCM uncompressed
-AAC+
-MP3 - MTBF: 500 000h (according to MIL217F at 25°C)