- Main Features:
- Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in two frequency bands: DE2 (470–530 MHz) and EE1 (530–590 MHz)
- Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
- Network-enabled system, featuring the ATW-R3210N receiver, offers network monitoring and control via Wireless Manager software
- True Diversity operation reduces dropouts
- Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
- Frequency scan and IR sync functionality for ease of setup
- Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
- Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
- Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules
- New rugged cH-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector
- Body-pack transmitter features tactile mute toggle switch (defeatable) for physical confirmation of mute status when transmitter display is not visible
- Charging terminals on transmitters work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries
- Antenna power available for powered antennas and other in-line RF devices
- Ground-lift switch helps eliminate audible hum caused by ground loops
- Balanced and unbalanced audio output jacks
- Body Pack Specifications:
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Battery Life:
- High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
- High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
- (Depending on battery type, usage, and environmental conditions.)
- Battery Type: Two 1.5V AA, not included
- Dimensions:
- 64 mm x 82 mm x 23 mm (W x D x H)
- 2.52" x 3.22" x 0.91" (W x D x H)
- Input Connections (cH-style screw-down 4-pin connector):
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
- Net Weight: 102 g (3.6 oz), without batteries
- Spurious Emissions: Following Federal and National Regulations
- High-pass (low-freq. roll-off): 125Hz, 12dB/octave
- Receiver Specifications:
- Receiving System: True Diversity
- Image Rejection: 60 dB nominal
- RF Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
- Maximum Output Level: XLR, balanced: +14 dBV 6.3 mm (1/4"), unbalanced: +8 dBV
- Antenna Input: BNC-type, 50 ohms
- Antenna Power: 12 V DC, 160 mA (combined)
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
- Dimensions:
- 210.0 mm x 191.0 mm x 43.4 mm (W x D x H)
- 8.27" x 7.52" x 1.71" (W x D x H)
- Weight: 1100 g (38.8 oz), without accessories
- Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount Adapters
- BP894xcH Specifications:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll Off: 80 Hz, 18 dB/octave (wired only)
- Open Circuit Sensitivity: -47 dB (4.3 mV) re 1V at 1 Pa
