- Main Features:
- Configurable for Dual 1X6 or 2-Input 1X12 operation
- Accepts sample rates from 27 to 192kHz
- Displays standard sample rates of 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz
- Displays Word Length of 16, 18, 20 and 24 bit
- Status and error LEDs show clock lock and data validity
- Automatic input equalizers compensate for very long cable runs
- Switchable re-clocking regenerates stable data before distribution
- Loop thru transformer balanced and isolated inputs
- Switchable input termination
- Individual, transformer balanced and isolated 110-ohm XLR outputs
- Two front-panel-selectable inputs
- 12 outputs
- Front panel control locking system
- Quiet, internal linear power supply (DDA-212XLR Input voltage is 115Vac. But it has a 230Vac version also, just add “230V” at the end of the model number to order it).
- Attractive and rugged 1RU package
- Specifications:
- INPUT:
- CONNECTORS: XLR female or BNC; paralleled input connectors for loop-thru expansion
- LEVEL: XLR 0.2Vp-p minimum; BNC 0.1Vp-p minimum
- IMPEDANCE: Transformer isolated, balanced and floating, XLR 110 ohms, BNC 75 ohms; terminating resistors may be switched in or out via front panel control
- SAMPLING FREQUENCY: 27 to 192kHz
- CABLE LENGTH: > 1000 feet (300 meters) of 110 ohm cable with equalizer; 75 ohm coax allows longer runs
- EQUALIZER: Automatic EQ for long lines via front panel push button
- CLOCK: Regenerated from input signal with dual mode PLL or non-reclocked to preserve Surround coding, switchable
- OUTPUTS:
- CONNECTORS: XLR Male or BNC Female, 6 or 12 depending on model
- LEVEL: XLR 4Vp-p loaded; BNC 2Vp-p loaded
- IMPEDANCE: XLR 110 ohms, balanced and transformer isolated; BNC 75 ohms, unbalanced
- OUTPUT JITTER: < 300 picoseconds peak to peak.
- PROPAGATION DELAY: < 25 nanoseconds
- INDICATORS:
- INPUT FAULT: (DDA-212 Only) Input 1, Input 2; identifies input with error condition
- INPUT TERMINATION: On, Off
- INPUT SAMPLE RATE: 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz
- INPUT WORD LENGTH: 16, 18, 20 and 24 bits
- INPUT DIGITAL ERRORS: Bi-Phase/Parity, Validity, Non-Linear PCM, DTS-CD Signal
- RE-CLOCKING: Off, On
- MODE: Pro, Consumer
- INPUT CABLE EQ: Locked, Enabled
- INPUT SELECT: DDA-106: 1, 2; DDA-212: 1, Bridge, 2
- POWER: LED indicates power is applied
- POWER: Internal Supply, 115/230VAC (selectable via internal jumper) ±10%, 50/60Hz, 10VA, IEC320 3 pin connector
- SIZE: 19” W x 1.75“ H x 8.5” D; 9 lbs.
- WARRANTY: Limited, One Year Warranty
