- Main Features:
- 16 Mono Inputs (TRS + XLR)
- 1 Stereo Input (TRS)
- 12 on-board Mix Outputs (LR, Mono Mix 1-4, Stereo Mix 1-3)
- 1 Stereo Matrix Out (TRS)
- Qu-32 Core inside (32 Mono + 3 Stereo Input Channels)
- Up to 11 Monitor Mixes (4 mono + 7 stereo)
- 4 FX Engines
- 4 FX Sends / Returns
- 4 Mute Groups
- 4 DCA Groups
- Recallable AnaLOGIQTM Preamps
- iLive FX Library
- dSNAKE Remote Audio Port expansion up to 38 inputs
- Automatic Mic Mixer
- 32×32 USB Audio Interface
- Qu-Drive direct Multitrack Recording / Playback on USB drives
- Compatible with ME Personal Mixing System
- Qu-Pad iPad App
- Qu-You iPhone / Android personal monitoring app
- Trim, polarity, HPF, gate, insert / ducker, 4-band PEQ, compressor and delay on all Inputs
- Insert, 1/3 octave GEQ, 4-band PEQ, compressor and delay on all Mix outputs
- Built-in Signal Generator
- RTA with Peak Band indication
- 19” Rack Mountable with optional rack ears
- Specifications:
- Mic/Line Inputs: Balanced, XLR and 1/4" TRS jack, fully recallable
- Input Sensitivity (XLR / TRS): -60 to +5dBu / -50 to +15dBu
- Analogue Gain: -5 to +60dB, 1dB steps
- Maximum Input Level (XLR / TRS): +19dBu / +29dBu
- Input Impedance (XLR / TRS): >5kΩ / >10 kΩ
- THD+N, Unity gain 0dB: 0.0005% -89 dBu (20-20kHz, Direct Out @0dBu 1kHz)
- THD+N, Mid gain +30dB: 0.001% -83dBu (20-20kHz, Direct Out @0dBu 1kHz)
- ST1, connector: Balanced, 1/4" TRS jack, half normalled
- Input Sensitivity (ST1, ST2 / ST3): Nominal +4dBu / 0dBu
- Trim: +/-24dB
- Maximum Input Level (ST1,ST2 / ST3): +22dBu / +18dBu
- Input Impedance: >7kÙ
- Mix1-10 and LR Out: Balanced, XLR
- Output Impedance: <75Ù
- Nominal Output: +4dBu = 0dB meter reading
- Maximum Output Level: +22dBu
- Residual Output Noise: -90 dBu (muted, 20-20kHz)
- Mtx 1-2: Balanced, 1/4" TRS jack
- Source (Alt Output / 2Trk Output): Patchable / LR post-fade
- Output Impedance: <75Ω
- Nominal Output: +4dBu = 0dB meter reading
- Maximum Output Level: +22dBu
- Residual Output Noise: -90 dBu (muted, 20-20kHz)
- dSNAKE:
- Inputs: Remote source for CH1-32, ST1, ST2, ST3
- Outputs: Patchable from Mix1-10, LR, Grp1-8, MTX1-4
- Compatible with AudioRacks AR2412, AR84, AB168
- Compatible with ME personal mixing system
- System:
- Dynamic Range: 112 dB
- Frequency Response: +0/-0.5dB 20Hz to 20kHz
- Headroom: +18dB
- Internal operating Level: 0dBu
- dBFS Alignment: +18dBu = 0dBFS (+22dBu at XLR output)
- Meter Calibration: 0dB meter = -18dBFS (+4dBu at XLR out
- Meter Peak indication: -3dBFS (+19dBu at XLR out), multi-point sensing
- Meter Signal indication: -48dBFS (-26dBu at XLR out)
- Meter Type: Fast (peak) response
- Sampling Rate: 48kHz +/-100PPM
- ADC, DAC: 24-bit Delta-Sigma
- Latency:
- 1.2 ms (local XLR in to XLR out)
- 0.7 ms (local XLR in to AES out)
- Operating Temperature Range: 0 deg C to 35 deg C (32 deg F to 95 deg F)
- Mains Power: 100-240V AC, 50/60Hz
- Maximum Power Consumption: 150W
- USB Audio:
- Qu-Drive: USB A
- Stereo Record: 2 channel, WAV, 48kHz, 24-bit, patchable
- Stereo Playback: 2 channel, WAV, 44.1 or 48kHz, 16 or 24-bit, to ST3
- Multitrack Record: 18 channel, WAV, 48kHz, 24-bit, patchable
- Multitrack Playback: 18 channel, WAV, 48kHz, 24-bit
- USB Audio Streaming: USB B, Core Audio compliant
- Send (upstream): 32 channel, WAV, 48kHz, 24-bit
- Return (downstream): 32 channel, WAV, 48kHz, 24-bit Dimensions & Weights:
- Desk mounted/stagebox use: 435.5 x 174.5 x 161 mm (17.2" x 6.9" x 6.4")
- Rack mounted: 483 x 135.4 x 177 mm (19" x 6.9" x 7") 4U