null

Shure SLXD24/N8CB Wireless System Freq: G58

Shure

BSW PART:
SLXD24-N8CB-G58

SINGLE HH SYS W/N8CB MIC 470-514MHZ

$899.00 $1,124.00
You save $225.00

SLX-D® Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design, the SLXD2 easily syncs with a wireless receiver. A variety of interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from day-long presentations to nighttime performances.

The SLXD24/N8CB Wireless System delivers transparent, 24-bit digital audio and rock-solid RF performance for a wide range of applications, from day-long presentations to nighttime performances. Operate up to 32 compatible systems per 44 MHz band, with easy setup and optional rechargeability accessories for wireless excellence, wherever required. Ships with SLXD4 single-channel receiver and SLXD2/N8CB handheld transmitters, including the Nexadyne™ 8/C wireless capsule, with antenna and rackmount accessories and 2 AA batteries.

$899.00 $1,124.00
You save $225.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping

  • SLXD2 Handheld Main Features:
  • Frequency Band: G58
  • Transparent 24-bit digital audio
  • Extended 20 Hz to 20 kHz frequency range (microphone dependent)
  • 118 dB dynamic range
  • Digital predictive switching diversity
  • Operating range of 100 m (300 ft.)
  • 44 MHz tuning bandwidth (region dependent)
  • 32 available channels per frequency band (region dependent)
  • Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
  • Easy pairing of transmitters and receivers over IR scan and sync
  • Up to 8 hours from 2 AA batteries. Upgrade to the optional Shure SB903 Lithium-ion rechargeable battery to monitor battery charge status in hours and minutes, as well as battery life and health statistics.
  • Rugged metal construction
  • RPW200 Specifications:
  • Type: Dynamic (moving coil)
  • Polar Pattern: Cardioid
  • Frequency Response: 50 to 20.000 Hz
  • Output Impedance: 300 Ω
  • Sensitivity (Open circuit voltage @1 kHz, typical): –54,0 dBV/Pa (2,00 mV) 1 Pa = 94 dB SPL
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Weight: 258 g
  • Connector: Three-pin professional audio (XLR), male
  • Housing: Die-cast aluminum with black paint
  • SLXD4 Specifications:
  • Dimensions (H × W × D): 1.65 × 7.76 × 5.98 in (42 × 197 × 152 mm)
  • Weight: 1.8 lb (816 g) (without antennas)
  • Housing: Galvanized Steel
  • Power Requirements: 15 VDC @ 600 mA (Supplied by external power supply, tip positive)
  • RF INPUT
  • Spurious Rejection: >75 dB (Typical)
  • Connector Type: BNC
  • Impedance: 50 Ω
  • AUDIO OUTPUT
  • Gain Adjustment Range: –18 to +42 dB in 1 dB steps
  • Configuration:
  • - 1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
  • - XLR: Balanced (1=ground, 2=audio +, 3=audio –)
  • Impedance:
  • - 1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
  • - XLR (line): 400 Ω (200 Ω Unbalanced)
  • - XLR (mic): 150 Ω
  • Full Scale Output:
  • - 1/4" (6.35 mm): +15 dBV differentially (+9 dBV single)
  • - XLR (LINE setting): +15 dBV
  • - XLR (MIC setting): –15 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom: 1/4" (6.35 mm): Yes
  • Power Protection: XLR: Yes
  • NETWORKING
  • Network Interface: Single Port Ethernet 10/100 Mbps
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 100 m (328 ft)