The Clear-Com Encore intercom system delivers superb audio performance while offering a streamlined, user-intuitive design. All components are built to handle the roughest use in fast-paced, high-intensity applications. Even under the most challenging conditions, the noise attenuating headsets and noise canceling microphones, combined with anti-sidetone circuitry, minimize acoustic noise and feedback to provide superior sound quality.
The Clear-Com MS-702 is a one-rackspace, two-channel main station with a regulated 1.2-amp fail-safe power supply, individual channel short-circuit protection and a versatile intercom monitoring system. It supports two intercom channels with up to 40 beltpacks or 10 speaker stations. It offers excellent speech intelligibility in both high- and low-noise environments. Click here to get a quote
The Clear-Com MS-702 can monitor intercom activity on one or both channels with individual listen-level controls. Monitoring intercom activity is possible through a headset or the internal loudspeaker. The high-sensitivity internal speaker provides intelligible communication in the most active production environments.
The Clear-Com MS-702 contains mic preamps with limiters, and speech-shaping circuits for enhanced intelligibility. An individual electronic momentary/latching talk button is provided for each channel. These buttons light dimly when latched - blue-color LED while in stand-by and amber-color LED when latched. The channels may be accessed separately or simultaneously without tying them together. An optional gooseneck mic is available.
For paging applications, the Clear-Com MS-702 provides a balanced, line-level output signal to a 1/4" TRS connector on the rear panel. The front panel Announce button activates the output and the Announce relay. The relay circuit, on a separate 1/4" TRS connector, is typically used to mute control-room monitors during live announcements.
Call buttons for each channel signal all stations on that party line by flashing brightly. Along with the visual signal, the station's speaker will emit an audible signal if the remote station operator holds the Call button for more than 2 seconds.
The Clear-Com MS-702 is equipped with a global Remote Mic Kill button that will turn off the microphone talk circuits of all Clear-Com beltpacks in the system, eliminating extraneous noise from the open headset microphones.
The Clear-Com MS-702 accepts a line-level external program input for monitoring in the headset and speaker and/or mixing with intercom audio on either or both channels. When Interrupt is selected, the program signal is interrupted when the Talk button is pressed.
The Clear-Com MS-702 provides visual indication of power supply conditions. In the event of a short circuit or current overload on a channel, that channel will shut down while the other one continues to operate. As soon as the fault condition is removed, the auto-reset circuitry will restore power to that channel, even under full load conditions.
The Clear-Com MS-702 connects to remote stations with standard, two-conductor shielded mic cable. User-selectable setup dip switches are provided on the rear panel.
For detailed information on the MS-702, click on the data sheet.
Clear-Com MS-702 Features:
• Supports up to 40 beltpacks or 10 speaker stations on two channels and 12 headsets
• Separate short-circuit protection for each channel
• Dual-action electronic momentary/latching talk buttons
• Program feed to both channels, with selectable Program Interrupt (IFB)
• Call signal buttons for each channel
• Global Remote Mic Kill
• Announce output with relay
• Microphone limiting
• Volume controls for each channel
• Visual and audible Tone Alert signaling
• Channels A & B Link switch
• Built-in speaker
• Optional gooseneck mic
• External switchable line termination on each channel
• Universal voltage power supply for 100-240 VAC operation